8 Operation
Maschinenfabrik Reinhausen GmbH 2018
163
5252433/02 EN
ECOTAP
®
VPD
®
CONTROL PRO
Signal
Description
Q1 Off
Motor protective switch triggered
Par. grp. 1
Parallel operation group 1 active
Par. grp. 2
Parallel operation group 2 active
Table 56: Measured values and signals
If you call up the measured value recorder directly on the device display,
you can select a maximum of 3 measured values. If you access it via the
web visualization, you can select a maximum of 10 measured values.
To display the measured value recorder, proceed as follows:
1. Go to
Recorder
.
Figure 101: Recorder
2. Select the signals to be displayed in the
list
.
3. If necessary, set the desired
axis
for each signal.
4. Enter the
start time
and
end time
for the measured value display.
Summary of Contents for ECOTAP VPD CONTROL PRO
Page 1: ...Voltage Regulator ECOTAP VPD CONTROL PRO Operating Instructions 5252433 02 EN ...
Page 190: ......
Page 191: ......