1 Introduction
Maschinenfabrik Reinhausen GmbH 2016
5
4434052/01 EN
COMTAP® ARS
Introduction
This technical file contains detailed descriptions for monitoring during opera-
tion, troubleshooting, and maintenance.
It also includes safety instructions and general information about the prod-
uct.
Information about installation can be found in the installation and commis-
sioning instructions.
This technical file is intended solely for specially trained and authorized per-
sonnel.
Validity
The document supplied with the product is always the valid version. This
technical file is configured for the specific order and applies to the following
products, the serial numbers of which can be found on the delivery docu-
ments:
▪
Advanced Retard Switch COMTAP® ARS
▪
Drive shaft
Manufacturer
The product is manufactured by:
Maschinenfabrik Reinhausen GmbH
Falkensteinstraße 8
93059 Regensburg, Germany
Tel.: (+49) 9 41/40 90-0
Fax: (+49) 9 41/40 90-7001
E-mail: [email protected]
Further information on the product and copies of this technical file are avail-
able from this address if required.
Completeness
This technical file is incomplete without the supporting documents.
The following documents apply:
▪
Unpacking instructions (included in the scope of delivery)
▪
Supplement (included in the scope of delivery)
▪
Routine test report (included in the scope of delivery)
▪
Connection diagrams (included in the scope of delivery)
▪
Dimensional drawings (included in the scope of delivery)
1
1.1
1.2
1.3
Summary of Contents for COMTAP ARS
Page 1: ...Advanced Retard Switch COMTAP ARS Operating Instructions 4434052 01 EN ...
Page 48: ......
Page 49: ......
