Mr.Paldu Holzspalter 1050, Operating Instructions Manual

Page: 13 / 36

Page 11
Service and Inspection
Servicing
Oil Change
Caution!
Dispose of used oil in accor-
dance with environmental regulations.
Check legal environmental regulations.
Note:
Before changing oil, retract riving
knife.
The first oil change should be carried
out after 50 operating hours and fur-
ther oil changes should also be carried
out every 50 operating hours or at least
once yearly.
Fig. 7 - Oil change

Turn both ventilation screws (1) out
of the frame (2), turn machine upside-
down and have the outcoming oil rinse
into a collection container.

Then turn machine in normal posi-
tion again and fill in the new oil. At
each ventilation screw there has to be
filled in about 1,5 lt. of oil.

Control oil level at the oil sight-glass
(3).

When oil sight-glass is filled switch
on machine and move spitting knife
two- or threetimes out and in.

Then check oil level again and fill
up oil if necessary.
Total oil capacity of hydraulics system:
• 3 lt.
 Suitable oil types:
1
1
2
3
Type
£js=eim=
jNM
^o^i
sáí~ã=
abNM
bic
eóÇêÉäÑ=
NM
dbkli
eim=NM
bppl
kìíç=eNM
s^isli
fkb
räíê~ã~ñ=
NM
pebii
qÉääìë=
qNM
qbu^`
l
oçåÇç=
eaJwNM
`^pqoli
eóëéáå=
^te=NM
cr`epL
_~ót~
oÉåçäáå=
_P
_m=
båÉêÖçä
pec=NM
Table 4: Suitable oil types