EN ©
2021 techBite
. All rights reserved.
ARC 13.3 Slim
40
Unscrew the retaining screw and remove it. Slide the M.2 2280 into the
connector gently so that the cut-out in the module fits into the socket. Secure
the module by gently screwing it to the housing. Replace the compartment cover
and tighten the screws that secure it.
With the help of the tool located in:
Control panel \ All elements of the control panel \ Administrative tools \ Computer
management \ Disk management
You can create and delete partitions on the new disc. Once you have set up your
operating system partition, find the new disc and format it according to your
preferences.
We strongly advise against any manipulation of the parameters of " Disc 0 ",
which is a system disc, as any problems caused by interference in its structure may
result in voiding the warranty.
13. Safety remarks
13.1 Troubleshooting
If you have any problems with the device, please read the following advice and
follow the instructions below.
•
MicroSD Memory Card - Make sure that the microSD memory card is
installed correctly in the correct microSD slot for the microSD cards. If it
does not help use another memory card of appropriate class and capacity.
•
USB socket - Check the cable by connecting another device. If it doesn't
help, use another cable.
•
Internet / Wi-Fi -
Check if the aeroplane mode is not on because it disables
using any wireless network functions. Check network range. Check if the
function is activated in the device and the parameters set correctly. Check
M.2 B Socket
Protection for module M.2
2280
Protection for module
M.2 2242
