EN ©
mPTech 2022. All rights reserved. Rumba 2
20
digits.
15
Volume
buttons
They are designed to change the
volume of the media and during
the call. When held down the
volume up button turns the
flashlight on or off
16
LED
Diode is used as a torch.
17
Contacts
Allow you to connect your phone
to the charging base.
18
USB-C port
When connected, the charger
enables recharging the battery.
You can transfer data (photos,
videos, music) when you connect
it to your computer.
19
Gap
Allows to take off a cover of the
phone.
20
Headphone
port minijack
3.5 mm
It
allows
you
to
connect
headphones to your phone, so
you can listen to the radio
(improve the quality of reception -
act as an additional antenna),
music, and also make calls (when
headphones are equipped with a
microphone).
Turning the phone on/off
To turn the phone on/off press and hold the Red handset button.
If directly after turning the phone on you will see a PIN code
request, (in form of “****”) type the code and press
Menu button
Inserting SIM, memory card and the battery
If the phone is switched on - switch it off. Remove the back cover
of the phone - use your fingernail to raise it using the gap in the
case. Insert the SIM card - It is supposed to be placed with its gold
contacts facing down, the way in which the slot is embossed.
Insert the memory card - to open the cover of the card reader
