©
2022 mPTech. All rights reserved. Halo 3
25
Turning the „Silent” mode on and off
The <#> key is used to switch sounds to vibration in the standby mode. Press and
hold it for approx. 2 seconds until a profile activation message and profile symbol icon
appear. By pressing and holding the <#> key again will return to the previous sound
profile.
Call handling functions
Calling
To call a number stored in the [Contacts] submenu (phonebook), select [Menu] >
[Contacts] search for the desired contact (by typing the contact name using the
keypad) in standby mode, then highlight the contact and make the call by pressing
the <Green Handset> button.
We recommend that you enter the area code prior to the telephone number.
Unlock your phone and select a contact from the phonebook - [Phonebook]. Press
<green handset> button to start the call. Press <red handset> button to finish the
call.
Answering
Press <green handset> to answer an incoming call. Press <red handset> to finish/
reject the call.
Messages
Creating and sending text messages
Enter: [Menu] > [Messages] > [Write message]. Type in the message using the keypad.
Sings are typed in letter by letter.
The phone is not equipped with a dictionary. <#> button is used to change the writing
mode. You can choose from, among others Abc - the first letter will be capital, the rest
lower case, abc - only lowercase, ABC - only uppercase, 123 - digits only. To enter a
diacritical character i.e. period, comma, dash, etc., press <*> and choose from the list,
or press the 1 a correct number of times. To enter a space between the words press
<0> button.
When you have entered the message, press [Options] > [Send to] and enter the
number using the keypad or add it from the phone list. After entering the
number/choosing a contact enter: [Options] > [Send], to send the message.
Messages display
Enter:
[Menu]
>
[Messages]
>
[Inbox],
choose a message from the list and select <OK>
or
[Options]
>
[View]
to see the message itself.
List of contacts
Adding a new contact
Enter [Menu] > [Phonebook] > [Add new contact]. Enter the contact details: name,
phone number, photo. You can also assign a ringtone to a contact.
Press [Options] > [Save] to save the contact.
Search for a contact
Enter [Menu] > [Phonebook]. Enter the first letter of the contact. Phone numbers
beginning with that letter will appear in the list. To find another contact use navigation
buttons <Up> and <Down>. After searching and chosing a contact enter [Options] a
list of available options will appear:
