AUTHORIZED SERVICE
Possible Faults and Things that You can do Before Calling Technical Service.
IF LIGHTING IS NOT FUNCTIONING:
Make sure that the plug is plugged in, and that the fuses are intact.
Check the bulbs. Make sure you unplugged the device before performing this check. Tighten
the bulbs if they are loose; you can replace the bulbs if they still don’t work.
IF THE DEVICE DOES NOT RUN IN ANY WAY:
Check to see if the hood is plugged in or if the plug is fit properly into the socket.
Check the fuse, to which the appliance is connected, as well as the main fuse of your house.
IF THE DEVICE PERFORMANCE IS NOT ENOUGH AND IT CREATES HIGH NOISE WHILE RUNNING:
Is the outlet diameter of the appliance’s flue adequate? (min. 120 mm).
Are the metal filters clean? Please check.
If you use the hood without flue, make sure that the carbon filters are not older than 6 months.
Be attentive to ventilate your kitchen adequately, in order to provide an airflow. If you are still
not satisfied with the performance of the appliance, consult the authorized technical service.
Zwróć uwagę na wentylację w kuchni, zapewniającą odpowiedni przepływ powietrza.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
NOTE! MPM agd S.A. reserves its right to modify the technical data.
PROPER DISPOSAL OF THE PRODUCT
(waste electrical and electronic equipment)
Poland
Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be hand-
ed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste col-
lection points, the user should contact the municipal point of electric waste collection or used equipment processing de-
partment.
