29
EN
USE OF PRODUCT
Fi g. 21 5 Sp d D i g Bu t to n
1.
Press this button to turn on the
product
2.
Press this button to decrease the motor
speed
3.
Dig display You can follow which speed
the product is currently working on this
display
4.
Press this button to increase the motor
speed
5.
When timer button is pressed, a
15-minute timer function will be
activated; display will give a signal once
the timer starts and the motor will stop
automatically after 15 minutes
6.
Press this button to turn on and off the
lamp
Filters should be cleaned when “C” signal appears on the Display or (due to usage) every 2 or 3
weeks. To delete “C” signal after the filters are cleaned and replaced, press and hold
button
more than 3 secs (when device is off). Letter “E” will appear on the Display and it will switch to
normal operation. If operation before deleting the “C” signal is required, active motor speed
will appear for 1 sec when you press
button and then the motor will resume running.
