20
EN
WARNING!
Fire danger!
The oil residue in the oil filter may catch fire.
Clean the oil filter at least once
every 3 months.
Never operate the device without the oil filter.
The oil residue in the oil filter may catch fire. Never work with open flame (ex.
flambe) near the device. The apparatus is allowed to be installed near a solid
fuel (e.g. wood or coal) heater only if it has a non-removable cover. No sparks
should be scattered.
Hot oils and fats catch fire easily. Hot oils and fats should never be left unattend-
ed. Never try to put out the fire with water. Turn off the cooker. Kill the flames
carefully using a cover, fire blanket or a similar material.
Gas operated cookers that do not have a cooking pot on create high heat during
operation. A ventilation device placed over the cookers can be damaged or burned
for this reason. Operate gas cookers only when there is a cooking pot on them.
Operating multiple gas cookers simultaneously creates high heat. A ventilation
device placed over the cookers can be damaged or burned for this reason.
Never operate two gas cookers longer than 15 minutes on high flame setting.
A large burner over 5kW (Wok) has the power of two gas burners.
WARNING!
Electrocution hazard!
A malfunctioning device may cause electric shock. Never turn on a malfunctioning
device. Pull the power plug and switch off the circuit breaker. Call customer service.
Unsuitable repairs pose hazards. Repairs and replacement of damaged power
cords must be performed only by a customer services technician trained by us.
If the device is malfunctioning pull the power plug and switch off the circuit
breaker. Call customer service.
Water leaking into the device may cause electric shock. High pressure or steam
cleaners must not be used.
DANGER!
Danger of physical injury!
During the installation, there is a danger of physical injury due to the sharp edg-
es. Use protective gloves throughout the installation process of the appliance.
Due to risk of dropping the appliance, assembly of all safety bolts and covers
must be performed as specified in the user manual.
