94
4
EMULATION MENU
Mark TOF Detect
Allows the user to select which edge of the black line is used for TOF (Top Of
Form). The leading edge refers to the first edge seen by the media sensor as
the media feeds out of the printer or the start of the black line.
•
Mark Trail Edge
(factory default). Trailing edge or end of black line
denotes TOF.
•
Mark Lead Edge
. Leading edge or start of black line denotes TOF.
NOTE:
This option applies only when Gap/Mark Sensor is set to Mark.
EMULATION MENU
Overview
This section covers the following emulations:
•
PGL (page 96)
•
ZGL Config. (Refer to the
ZGL Programmer’s Reference Manual.
)
•
TGL Config. (Refer to the
TGL Programmer’s Reference Manual.
)
•
IGL Config. (Refer to the
IGL Programmer’s Reference Manual.)
•
STGL Config. (Refer to the
STGL Programmer’s Reference Manual.)
•
DGL Config. (Refer to the
DGL Programmer’s Reference Manual.)
•
MGL Config. (Refer to the
MGL Programmer’s Reference Manual
.)
•
IEGL Config. (Refer to the
IEGL Programmer’s Reference Manual.
)
You can select emulation default parameters directly from the control panel, or
by control codes as explained in the appropriate Programmer's Reference
Manual.
IMPORTANT
BEFORE you reconfigure an emulation, print a configuration sheet to
see all current settings.
PGL
The PGL emulation is the software based Printronix Graphics Language
(PGL) for the Printronix thermal printer family. It is based upon, and
compatible with, the IGP-100/200/400 board. It includes the following
features:
On-Line Form and Label Generation
makes it easy to create forms or labels
with a “preprinted” look for each application. PGL programs control all graphic
functions, dramatically reducing host computer programming and processing
time.
Graphic capabilities
include boxes, vertical and horizontal lines with user-
selectable thickness, logos, and special alphanumeric print features. Forms
and graphic designs can be duplicated horizontally and vertically.