MPI InfoPrint 6700-M40 Series, User Manual

Page: 70 / 298

70
Chapter 4
Main Menu
Save Config.
Load Config.
Print Config.
Delete Config.
Power-Up Config.
Protect Configs.
Name Config 1
Name Config 2
Name Config 3
Name Config 4
Name Config 5
Name Config 6
Name Config 7
Name Config 8
Reset Cfg Names
Auto Save
CONFIGURATION
(page 141)
RFID DIAGNOSTICS
(page 144)
Printer Tests
Test Count
Software Build
Feature File
1
Hex Dump Mode
Print Error Log
Clear Error Log
FLASH Installed
EMC FLASH Installed
2
DRAM Installed
Ptr On Time
Printer Usage
PrintHead Usage
Head On Time
Reset Head Data
Head Resolution
Head Voltage
Refer to the RFID
Labeling Reference
Manual.
Host Interface
ETHERNET PORT
ETHERNET SETTING
3
WLAN SETTING
4
Parallel Port
5
CENTRONICS
6
IEEE 1284
7
USB Port
Serial Port
Printer Mgmt
INTERFACE
(page 120)
NOTES:
Italicized items are available only when you enable Admin User in the
PRINTER SETUP menu.
1
This menu only appears if Feature File is loaded.
2
This menu only appears only if the EMC is installed.
3
This menu only appears only if the ethernet is installed.
4
This menu only appears only if the wireless ethernet is installed.
5
This menu only appears if Host Interface is set to Auto Switching.
6
This menu only appears if Host Interface is set to Centronics.
7
This menu only appears if Host Interface is set to IEEE 1284.
Mantenimiento Periféricos Informáticos C/Canteras, 15 28860 Paracuellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/