28
´L´ Limit – Command
This command transfers the set point value limits;
Master query
: „
[M01L0Fllllhhhhpp\r
„
llll
= Low-Limit, lower set point limit (Format as above)
**** = No change of the lower set point limit.
hhhh = High-Limit, upper set point limit (Format as above)
**** = No change of the upper set point limit.
pp
= Check sum
\r
= End-character CR.
Slave response
: „
[S01L17llllhhhhuuuuoooopp\r
„
llll
= Low-Limit, lower set point limit (Format as above)
hhhh = High-Limit, upper set point limit (Format as above)
uuuu = Lower working-range limit. This limit is specific to the device and cannot be
modified. The lower set point limit cannot be below the lower working range
limit.
oooo = Upper working range limit.
This limit is specific to the device and cannot be
modified.
The upper set point limit cannot be above the upper working range
limit.
pp
= Check sum
\r = End-character CR.
