MP Systems AK CB20, Installation, Operation & Maintenance Manual, Page: 10 / 81

4 MPSYSTEMS-M-001/06
3. Intended Uses

MP SYSTEMS auxiliary coolant and chip control systems are constructed for use on milling
and turning machines that have existing coolant tanks, complete machining environment
enclosures, CNC controls with interlocks and low pressure pumps, typically referred to as flood
pumps.

MP SYSTEMS auxiliary coolant and chip control systems are intended to work alongside the
standard low pressure pump. The high pressures generated can dramatically improve tool life
and reduce cycle time, but should only be used where process improvements warrant its use.

MP SYSTEMS auxiliary coolant and chip control systems includes 2 large capacity filters. The
filters primarily protect the high pressure pump and the cutting tools present in the machine
tool. The presence of the 2 large capacity filters keeps the machine tool and its coolant much
cleaner.

MP SYSTEMS auxiliary coolant and chip control systems are intended for use with water
based coolants or oils with viscosities between 90 and 140 SUS @ 100° Fahrenheit.