WDR-3124A
Web Console Configuration
3-55
Save Configuration
The following figure shows how the WDR-3124A stores the setting changes into volatile and non-volatile
memory. All data stored in volatile memory will disappear when the WDR-3124A is shutdown or rebooted
unless they are
y
. Because the WDR-3124A starts up and initializes with the settings stored in flash memory,
all new changes must be saved to flash memory before restarting the WDR-3124A.
This also means the new changes will not work unless you run either the
Save Configuration
function or the
Restart
function.
After you click on
Save Configuration
in the left menu box, the following screen will appear. Click
Save
if you
wish to update the configuration settings in the flash memory at this time. Alternatively, you may choose to run
other functions and put off saving the configuration until later. However, the new setting changes will remain
in the non-volatile memory until you save the configurations.
Summary of Contents for WDR-3124A
Page 50: ......