Moxa Technologies WDR-3124A User Manual Download

Page: 69 / 94

WDR-3124A

Web Console Configuration

3-46

Status

Wireless Status

The status for

802.11 info

parameters, such as Operation mode and Channel, are shown on the

Wireless

Status

page. The status will refresh every 5 seconds if the

Auto refresh

box is checked.

Certain values for

802.11 info

may not show up due to different operation modes. As a result,

Current BSSID

and

Signal strength

are not available in AP mode.

It is helpful to use the continuously updated information on this page, such as

Signal strength

, to monitor the

signal strength of the WDR-3124A in Client mode.

DNS Information

The DNS information screen displays the DNS server to which the WDR-3124A is connected and the DNS server
information.

SIM Status

The SIM Status screen displays the current SIM card in use and the status of the SIM cards installed in the
WDR-3124A.

Summary of Contents for WDR-3124A






























































































Search results

Summary of Contents for WDR-3124A

Reviews:

Related manuals for WDR-3124A

Brands by name

Popular brands

Moxa Technologies WDR-3124A, User Manual

Search results

Summary of Contents for WDR-3124A

Reviews:

Related manuals for WDR-3124A

Brands by name

Popular brands