W406-CE User’s Manual
Introduction
Networking and Communications Capabilities
y
Simple Network Management Protocol (SNMP)
—Monitors remote connections to the
network.
y
Simple Network Time Protocol (SNTP) Client
—Provides support for synchronizing the
device’s system time with an SNTP server, and supports Daylight Savings Time.
y
Serial Communications
—In
addition to the 16550 UART driver bound to a debug port and
the console port, a special driver for 2 additional Moxa serial ports is also included.
y
Network Utilities (IpConfig, Ping, Route)
—Utilities for troubleshooting various network
problems.
y
TCP/IP
—Includes IP, Address Resolution Protocol (ARP), Internet Control Message Protocol
(ICMP), Internet Group Membership Protocol (IGMP), Transmission Control Protocol (TCP),
User Datagram Protocol (UDP), name resolution and registration, and DHCP.
Supported Servers and Daemons
y
Telnet Server
—A
sample server that allows remote administration through a standard Telnet
client.
y
FTP Server
—A
sample server used for transferring files to and from remote computer
systems over a network using TCP/IP.
y
File Server—
The File Server functionality in Microsoft® Windows® CE enables clients to
access files and other resources over the network.
y
Dial-up Networking—
Consists of RAS client API and the Point to Point Protocol (PPP).
RAS and PPP support Extensible Authentication Protocol (EAP) and RAS scripting.
y
Watchdog—
A CPU Hardware function for reset CPU in a user specified time interval. You
must call the MOXA library function to trigger it.
y
Web Server (HTTPD)
—Includes ASP, ISAPI Secure Socket Layer support, SSL 2, SSL 3,
Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration
ISAPI Extensions.
1-3
