W406-CE User’s Manual
Getting Started
After logging in, enter the
netshare -h
command to learn how to configure shared folders.
For example,
netshare -s docs “\My Documents” -a admin
will share the “My Documents”
folder as “docs” for the user “admin”.
Connecting to a GPRS/EDGE Network
Before connecting to a GPRS/EDGE network, make sure the SIM card is properly installed and
the antenna is connected. (Please refer to W406 Hardware User’s Manual for installation details.)
Please note the SIM card must be installed when the embedded computer is powered off. The LED
indicators on the top panel can be used to check the signal strength. (A background process
“gprssignalled.exe” is responsible for this task.)
NOTE: Make sure that Mobile Equipment Error Message Format (CMEE) has not been set,
or the GPRS connection functions may return incorrect values.
1.
To create a connection, use the following command:
/> gprs_connect
You can connect to the GPRS/EDGE network using gprs_connect.exe. For more details, please see
the command syntax
gprs_connect –h
.
2-5
