– 1 –
– 2 –
– 3 –
P/N: 1802024260010
*1802024260010*
V2426A Series
Quick Installation Guide
First Edition, April 2015
Overview
The V2426A-C2 uses the Intel® Celeron® 1047UE processor and
the V2426A-C7 uses the Intel® Core™ i7-3517UE processor. Both
models feature 4 RS-232/422/485 serial ports, dual 10/100/1000
Mbps LAN ports, 3 USB 2.0 hosts, and 2 CFast sockets. The
computers provide 2 DVI-I outputs, making them particularly
well-suited for industrial applications such as rolling stock, SCADA,
and automation systems.
Most importantly, the V2426A computers come with two expansion
slots that enable you to install V2400A series expansion modules
(for example, a 2-port CAN module, an HSDPA/GPS/WLAN module,
an 8+8 port digital input/output module, a 2-port serial module, a
mini PCI expansion module, or a mini-PCI Express module),
providing greater flexibility for setting up various railway
applications.
Package Checklist
Before installing your V2426A computer, verify that the package
contains the following items:
•
V2426A series embedded computer
•
Wall mounting kit
•
Documentation and software CD or DVD
•
Quick installation guide (printed)
•
Warranty card
NOTE: Please notify your sales representative if any of the above
items are missing or damaged.
V2426A Panel Layout
V2426A Front View
V2426A Rear View
LED Indicators
The following table describes the LED indicators located on the
front and rear panels of the V2426A.
LED Name LED Color LED Function
Power
Green
Power is on and functioning normally.
Off
Power is off or power error exists.
Storage
Yellow
CFast card/HDD/SSD is transmitting data
Off
CFast card/HDD/SSD is not transmitting
data
LAN (1 or 2) Green
100 Mbps Ethernet mode
Yellow
1000 Mbps Ethernet mode
Off
10 Mbps or no activity
TX (P1-P4) Green
Serial port is transmitting data
Off
Serial port is not transmitting data
RX (P1-P4) Yellow
Serial port is receiving data
Off
Serial port is not receiving data
Installing the V2426A
The V2426A can be DIN-rail mounted, wall mounted, or VESA
mounted. Some mounting kits may need to be purchased
separately. Refer to the V2426A Hardware User’s Manual for
detailed installation instructions.
Connector Description
Power Connector
Connect the 12 to 48 VDC LPS or Class 2 power line to the V2426A
M12 A-coded power connector. If the power is supplied properly,
the Power LED will light up. The OS is ready when the Ready LED
glows a solid green.
ATTENTION
The branch circuit overcurrent protection must be rated at
a maximum of 5 A.
Grounding the V2426A
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection
from the ground screw to the grounding surface prior to connecting
the power.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface, such as a metal panel.
SG: The Shielded Ground (sometimes
called Protected Ground) contact is the
central pin of the power input
connector. Connect the SG wire to an
appropriate grounded metal surface.
DVI-I Outputs
The V2426A comes with 2 DVI-I female connectors for the DVI
display. These output interfaces are all located on the front panel
of the product. Be sure to use the correct cable to connect the
computer to the display.