UC-8100-ME-T Series Hardware User Manual
16
Installing the Cellular Module
The UC-8100-ME-T is provided with a PCIe socket for installing a cellular module. To install the cellular
module, do the following:
1.
Remove the four screws on the DIN-rail
mounting kit.
2.
Remove the two screws on the rear panel.
3.
Remove the four screws on the silver cover on
the right panel and take off the cover.
4.
Remove the screw on metal cover.
5.
Remove the three screws on the top panel.
6.
Remove the two screws on the bottom panel.
