ToughNet NAT Router User's Manual
TN-5916 Series Features and Functions
3-33
Enable SSH
Setting
Description
Factory Default
Select/Deselect
Select the appropriate checkboxes to enable SSH
Selected
Port: 22
Enable HTTP
Setting
Description
Factory Default
Select/Deselect
Select the appropriate checkboxes to enable HTTP
Selected
Port: 80
Enable HTTPS
Setting
Description
Factory Default
Select/Deselect
Select the appropriate checkboxes to enable HTTPS
Selected
Port: 443
Trusted Access
The Moxa ToughNet NAT Router uses an IP address-based filtering method to control access.
You may add or remove IP addresses to limit access to the Moxa ToughNet NAT Router. When the accessible
IP list is enabled, only addresses on the list will be allowed access to the Moxa ToughNet NAT Router. Each IP
address and netmask entry can be tailored for different situations:
•
Grant access to one host with a specific IP address
For example, enter IP address 192.168.1.1 with netmask 255.255.255.255 to allow access to 192.168.1.1
only.
•
Grant access to any host on a specific subnetwork
For example, enter IP address 192.168.1.0 with netmask 255.255.255.0 to allow access to all IPs on the
subnet defined by this IP address/subnet mask combination.
•
Grant access to all hosts
Make sure the accessible IP list is not enabled. Remove the checkmark from
Enable the accessible IP
list
.
