PRP/HSR Redundancy Box
CLI Command Support for the EOM-G103-PHR-PTP Module
B-2
Configuration Commands
Command
Display Information
hostname <string:token1>
Set system's network name (maximum 35 characters)
clock set <STRING:time> - hh:mm:ss
Adjust the clock
clock timezone gmt <INT:offset_hour>
Time zone hour shifting
clock summer-time start-date <STRING:month> The date summer time offset (daylight savings time)
starts
clock summer-time end-date <STRING:month>
The date when summer time offset (daylight savings time)
ends
clock summer-time offset <UINT:hour>
Summer time offset (daylight savings time)
redundancy mode [PRP/HSR]
Specify the redundancy protocol
multicast-filter action [drop/forward]
Set multicast filter action
multicast-filter <UINT:index>
Enable Multicast filter priority entry
multicast-filter addr <UINT:index>
<MACADDR:MacAddress>
set multicast-filter address
multicast-filter src-port <UINT:index>
<UINT:port>
Set source port of the multicast priority entry
multicast-filter mac-compare-length
<UINT:index> <UINT:len>
Set Compared length of multicast address
vlan-filtering vid-list <STRING:vlanids>
setting VLANs list
vlan-filtering vid [add/remove] <STRING:vlanids> VLAN filtering parameters
Configuration Redundancy Commands
Command
Display Information
entryforgettime
Set Entry forget time
Configuration Port Interface Commands
Command
Display Information
hw_interface [SGMII / 1000BaseX]
Set hardware interface as SGMII or 1000BaseX