PRP/HSR Redundancy Box
Featured Functions
3-15
5.
Auto backup to ABC-02 when configuration changes
Select the
Auto backup to ABC-02 when configuration changes
checkbox and then click
Apply
. This
function is disabled by default.
The ABC-02 can back up PRP/HSR RedBox configuration files automatically. While the ABC-02 is plugged
into the PRP/HSR RedBox, enable the
Auto backup to ABC-02 when configuration change
option and
then click
Apply
. Once this configuration has been modified, the PRP/HSR RedBox will back up the current
configuration to the ABC-
02’s
/His_ini
folder. The file name is created from the system date/time in the
following format:
MMDDHHmm.ini
.
Note: MM=month, DD=day, HH=hour, mm=minutes, from the system time
Log File Backup
The Moxa PRP/HSR RedBox reset button allows users to quickly back up files to the ABC-02. Simply press the
Reset button on top of the RedBox to force the RedBox to start backing up the current system configuration files
and event logs to the ABC-02.
NOTE
DO NOT remove the ABC-02 while performing upgrade, backup, or restore functions.
Restart
This function provides users with a quick way of restarting the system.
Factory Default
This function provides users with a quick way of restoring the Moxa PRP/HSR RedBox
’s configuration to factory
defaults. You can apply this function from the USB serial, Telnet, web-based consoles, or using the hardware
reset button.
NOTE
After restoring the Moxa PRP/HSR RedBox to the factory default configuration, you will need to use the default
network settings to re-establish a web or Telnet console connection with the Moxa PRP/HSR RedBox.
VLAN
Setting up Virtual LANs (VLANs) on your Moxa PRP/HSR RedBox increases the efficiency of your network by
dividing the LAN into logical segments, as opposed to physical segments. In general, VLANs are easier to
manage.