PRP/HSR Redundancy Box
Featured Functions
3-8
Offset
Setting
Description
Factory Default
User-specified hour
Specifies the number of hours that the time should be set
forward during Daylight Saving Time.
None
NOTE
Changing the time zone will automatically correct the current time. Be sure to set the time zone before setting
the time.
Time Server IP/Name
Setting
Description
Factory Default
IP address or name of
time server
The IP or domain address (e.g., 192.168.1.1,
time.stdtime.gov.tw, or time.nist.gov).
None
IP address or name of
secondary time server
The Moxa PRP/HSR RedBox will try to locate the secondary NTP
server if the first NTP server fails to connect.
Enable NTP/SNTP Server
Setting
Description
Factory Default
Enable/Disable
Enables SNTP/NTP server functionality for clients
Disabled
Warning Notification
Since industrial Ethernet devices are often located at the endpoints of a system, these devices will not always
know what is happening elsewhere on the network. This means that an PRP/HSR RedBox that connects to these
devices must provide system maintainers with real-time alarm messages. Even when control engineers are out
of the control room for an extended period of time, they can still be informed of the status of devices almost
instantaneously when exceptions occur. The Moxa PRP/HSR RedBox supports different approaches to warn
engineers automatically, such as email, trap, syslog, and relay output. It also supports two digital inputs to
integrate sensors into your system to automate alarms by email and relay output.
System Event Settings
System Events are related to the overall function of the PRP/HSR RedBox. Each event can be activated
independently with different warning approaches. Administrator also can decide the severity of each system
event.