OnCell G2100 Series User’s Manual
Using Short Message Services
6-2
Sending Short Messages
Follow these instructions to send a short message to a specific phone number.
1.
Type
AT+CMGF=1
and press
Enter
.
2.
Type
AT+CMGS="<phone number>"
and press
Enter.
The terminal will present a ">"
prompt. Enter your message at the prompt.
3.
Press
Ctrl + Z
to deliver the message.
ATTENTION
AT+CMGF=1 sets the SMS to Text mode.
Reading Short Messages
Follow these instructions to read a short message that was sent to the OnCell.
1.
Type
AT+CMGF=1
and press
Enter
.
2.
When a short message is received, the modem will respond with a storage number for the
message. The storage number will appear as
+CMTI: "SM", x
(where
x
is the storage
number).
3.
Type
AT+CMGR=x
to read the message (where
x
is the storage number of the message).
Press
Ctrl
+
Z
here
