Moxa MxNVR Industrial Video Recorder
System Configuration
5-2
System Configuration by Web Console
System configuration can be done remotely with Internet Explorer. To access the server, type the system
configuration URL,
http://<IP address of Video Server>/setup/config.html
, to open the configuration
main page.
There are six configuration categories:
System, Network, Video, Serial Port, Audio
, and
Alarm
. A
description of each configuration item is shown in the table below:
Category
Item
Description and Contents
System
General
Set Host Name and Date/Time
Accounts
Administrator, User, and Demo Account Privileges Management
Local storage
Set up the local storage capability
Diagnosis
Self-diagnostic report with system, communication, power, and
LED status
System Log
System Log and operation information
System Parameter
System parameter information and Import/Export functions
Firmware Upgrade
Remote Firmware Upgrade
Factory Default
Reset to Factory Default
Reboot
Device will reboot for restarting system
Network
General
The IP network settings of this MxNVR-MO4
SMTP Server
Set up Primary and Secondary SMTP Server and e-mail accounts
FTP Server
Set up the Primary and Secondary FTP Server
DDNS
Configure Dynamic DNS service
Universal PnP
Enable UPnP function
Multicast Setting
Set up Multicast (IGMP) Streaming
Accessible IP
Set up a list to control the access permission of clients by IP address
SNMP
Configure the SNMP settings
QoS (ToS)
Configure ToS(Type of Service)
HTTP Event Server
Set up the HTTP Event Server to send the event alarm action
Modbus/ TCP
Enable Modbus/TCP function
DynaStream™
Basic Setting
Setup the video frame rates for alarm or event triggers
Trigger Condition
Setup the event or alarm conditions that trigger Dynastream™ as
well as the desired actions that follow.
Video
Image Settings
Configure the attributes of the video image
Camera Modulation
Select the camera’s modulation (NTSC, PAL or AUTO)
Video Performance
Configure the Size (Resolution), FPS, and Video Quality
Camera Control
Set up the Camera’s PTZ Control
Audio
Audio Settings
Set up the audio source
Alarm
System Alarm
Configure Power Failure and Network Connection Broken alarms
Event
Alarm
Basic
General event alarm settings
Schedule
Set up the Alarm schedule
Digital Input Configure the Digital Input Alarm
Video Loss
Configure the video loss alarm
CGI Event
Set up the CGI event alarm
Sequential
Snapshot
Set up the Sequential Snapshot operation
This table can also be found on the
System Configuration
Overview webpage
.
