MC-3201 Series Hardware User Manual
20
4.
BIOS Setup
In this chapter, we describe the BIOS settings for the MC-3201 computer. The BIOS is a set of input/output
control routines for peripherals to initialize the basic settings. The BIOS helps boot the system before the
operating system is loaded. The BIOS setup allows the user to modify the system configuration for basic
input/output peripherals. All the configurations are stored in the CMOS RAM, which has backup battery in
case the computer is not connected to a power source. Consequently, the data stored in the CMOS RAM is
retained when the system is rebooted, or the power is disconnected.
Entering the BIOS Setup
To enter the BIOS setup utility, press the F2 key while the system is booting up. The main BIOS Setup
screen will appear. You can configure the following settings on this screen.
•
Continue:
Continue to boot up
•
Boot Manager:
Select the device for boot up
•
Device Management:
Enter the device configuration menu
•
Boot From File:
Select the UEFI boot up file
•
Administer Secure Boot:
Enter the Secure Boot menu
•
Setup Utility:
Enter the BIOS configuration menu
•
Intel® Management Engine BIOS Extension:
Enter the AMT configuration menu (not supported in
models with Intel® Celeron® and Core™ i3 processors)
Select
F2
to enter the
BIOS configuration
.