– 1 –
– 2 –
– 3 –
P/N: 1802020002010
*1802020002010*
MAR-2000
Quick Installation Guide
First Edition, June 2015
Overview
The MAR-2000 is a multi-WAN router with 802.11n, GPS, and 3G
GSM/HSPA+ interfaces. It features 2 RS-232/422/485 serial ports,
2 Ethernet ports, 4 digital input channels, 4 digital output channels,
a CompactFlash socket, and 2 USB 2.0 ports. The MAR-2000 is
particularly well-suited for rolling stock or other vehicle
applications, giving a solid, convenient foundation for configuring
an intelligent, cost-effective, multiple-WAN mobile
communications environment.
Package Checklist
•
1 MAR-2000 embedded computer
•
Wall-mounting kit
•
DIN rail mounting kit
•
CBL-4PINDB9F-100: 4-pin pin header to DB9 female console
port cable, 100 cm
•
Quick installation guide (this guide)
•
Documentation and software CD
•
Warranty card
Note: Please notify your sales representative if any of the
above items are missing or damaged.
Panel Layout
Refer to the following figures for the panel layouts.
Front View
Rear View
LED Indicators
The following table describes the LED indicators located on the
front and rear panels of the MAR-2000.
LED Name
LED Color LED Function
Power
Green
Power is on and functioning normally
Off
Power is off, or power error
Storage
Yellow
CF card is detected
Off
CF card is not detected
Ready
Green
The system is ready
Off
The system is not ready
X1
(programmable)
Green
Programmable: no default definition
Off
Programmable: no default definition
LAN1, LAN2
Green
100 Mbps Ethernet mode
Yellow
10 Mbps Ethernet mode
Off
No activity
P1 Tx, P2 Tx
(on the right of
the DB9 port)
Green
Serial port transmitting data
Off
Serial port not transmitting data
P1 Rx, P2 Rx
(on the right of
the DB9 port)
Yellow
Serial port receiving data
Off
Serial port not receiving data
Installing the Mounting Kits
Wall and cabinet mounts
The two metal brackets included with the MAR-2000 can be used to
attach it to a wall or the inside of a cabinet. Using two screws per
bracket, first attach the brackets to the bottom of the MAR-2000.
Next, use two screws (M3 type, torque 4.5±0.5 kgf-cm) per
bracket to attach the MAR-2000 to a wall or cabinet.
DIN rail assemblies
An aluminum DIN rail mounting assembly is included in the
package. When attaching the rail assembly to the MAR-2000,
orient the stiff metal spring towards the top.
STEP 1:
Insert the
top of the DIN rail
into the slot just
below the stiff metal
spring.
STEP 2:
The
mounting
assembly should
then snap into
place, as shown.
To remove the MAR-2000 from the DIN rail, reverse steps 1 and 2
above.
Connector Description
Power Connector
Connect the 24 VDC power line to the MAR-2000’s power input
with the M12 connector. When the MAR-2000 system is ready, the
READY LED will display a steady green color.
Grounding the MAR-2000
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection
from the ground screw to the grounding surface prior to connecting
the power.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface, such as a metal panel.
There are two ground
connectors on the front
panel of the MAR-2000.
One is located at the
middle pin of the power
input, the other is beside
the power input. Use either
connector for grounding.
SIM Card
The MAR-2001-T supports 2
cellular modules, and the
MAR-2002-T supports 3
cellular modules. Unscrew the
SIM card cover and insert the
SIM card in the desired slot.
