Remote I/O
1
w w w. m o x a . c o m
The ioThinx 4510 supports tool free installation and removal. With
its unique mechanical design, users can mount the module on the
DIN-rail and later remove it, all tool free. In addition, the ioThinx 4510
has new web user interface. Using the new friendly web design, users
can easily monitor the I/O status via the web dashboard and configure
I/O modules.
ioThinx 4510 Series
Advanced modular remote I/O adapter with built-in serial ports
The ioThinx 4510 is an advanced modular remote I/O product with a
unique hardware and software design, making it an ideal solution for a
variety of industrial data acquisition applications.
The ioThinx 4510 has 2 Ethernet ports that support a daisy-chain
topology to save cabling cost, as well as 1 RS-232/422 port or 2
RS-485 (2-wire) ports to enable Modbus RTU to Modbus TCP/SNMP/
RESTful protocol conversion. In addition, the ioThinx 4510 supports
up to 32 I/O modules to help users collect data from field sites.
Introduction
›
Easy tool-free installation and removal
›
Easy web configuration and reconfiguration
›
Built-in Modbus RTU gateway function
›
Supports Modbus/SNMP/RESTful API
›
Supports up to 32 I/O modules
›
Wide operating temperature models available for -40 to 75°C
(-40 to 167°F) environments
well as connecting the wiring for both communication and I/O signal
acquisition. Furthermore, no tools are required to remove the ioThinx
from a DIN-rail. Removing all of the modules from a DIN-Rail is also
easy using the latch and release tab.
The ioThinx 4500 Series has a unique mechanical design that reduces
the amount of time required for installation and removal. In fact,
screw drivers and other tools are not required for any part of the
hardware installation, including mounting the device on a DIN-rail, as
Easy Tool-Free Installation and Removal