ioLogik E2200 Series
Click&Go
4-11
Active Message Server
The
Active Message Server
configures one or more destination IP addresses of the Message Servers that
receive event messages generated by the Click&Go logic. The message protocol (TCP or UDP) and the message
socket port must also be configured.
The active message defined in the Click&Go logic will be sent to all addresses listed in the
Message Recipient
List
.
Message Port(TCP/UDP):
is the Port which the computer use to communicate with the device, and the
default port for the TCP/UDP is 9000
You can specify how many retry and between how many intervals second you want the device to send an Active
message.
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...