ioLogik E2200 Series
Using ioAdmin
3-5
System
Several operations can be accessed from the
System
menu.
Auto Scan ioLogik Devices
The
Auto Scan ioLogik Devices
function searches for ioLogiks on the network automatically. When
connecting for the first time, or when recovering from a network disconnection, you can use this command to
find any ioLogik that is connected to the physical network.
You can search for ioLogik devices by type, IP address range, or model name. Click
Start Search
to start
searching and the search results will be shown at the bottom of the window.
Select auto search type
Search for an ioLogik device by whether it is an
Smart Ethernet Remote I/O Device
or
RS-232/485
remote I/O
.
Search a range of addresses
Search for ioLogik devices within a range of IP address addresses by defining a starting IP address and an
ending IP address, or by using the netmask.
Search all support models
Select the specific model number(s) of the ioLogik devices you wish to search for.
Summary of Contents for ioLogik E2210
Page 138: ...ioLogik E2200 Series Cable Wiring D 4 Digital Output Sink Type...
Page 139: ...ioLogik E2200 Series Cable Wiring D 5 RTD Input Wiring Structure 2 wire 3 wire...
Page 140: ...ioLogik E2200 Series Cable Wiring D 6 Thermocouple Input Wiring Structure 2 wire...
Page 144: ...ioLogik E2200 Series Input and Output Terminal E 4 ioLogik E2262 I O left to right...