IEF-G9010 Series User Manual
81
Configuring Management Protocols and Ports
Steps:
1.
Go to [Administration] > [System Management].
2.
In the [Management Method] pane, configure the following settings:
a.
Select the protocols that are allowed to be used to access the device.
b.
Enter the protocol port numbers.
NOTE
The HTTP and HTTPS protocols are used for connecting to the web management console. The SSH and
Telnet protocols are used for connecting to the command line interface (CLI).
The Sync Setting Screen
The IEF-G9010 Series can be managed by Moxa’s SDC (Security Dashboard Console). Use this screen to
register the IEF-G9010 Series to an SDC instance.
Enabling SDC Management
Steps:
1.
Go to [Administration] > [Sync Setting].
2.
In the [SDC Setting] pane, configure the following settings:
a.
Use the toggle to enable or disable SDC management.
b.
Enter the IP address of the SDC server.
