CN2510
Getting Started
2-13
Async server name
—
CN2510 uses this name to identify itself when requested by an SNMP station or UNIX
host. Use an ASCII string with maximum length of 40 characters for the name. Spaces are allowed.
Async server location
—
CN2510 reports this location to the SNMP station when requested. Use an ASCII
string with maximum length of 44 characters for the location. Spaces are allowed.
Async server serial number
—
Each CN2510 Async Server is assigned a unique serial number before it
leaves the factory. The serial number cannot be changed.
Domain server 1/2 IP address
—
A Domain Name Server is a network host that translates host names to
IP addresses. Hosts use the Domain Name Server to request the IP address that corresponds to a particular
url (such as www.moxa.com). Input the IP address of the primary Domain Name Server in the
Domain
server 1 IP address
field, and the IP address of the secondary Domain Name Server in the
Domain
server 2 IP address
field. When CN2510 receives a connection request, CN2510 first checks the host
table defined on the Host_table page. If a matching entry cannot be found, CN2510 sends a query to the
Domain Name Server.
WINS function disable
—
Enable or disable the WINS server. The default setting is “enable.”
WINS server IP address
—
If a WINS Server is connected to the network, use this field to record the WINS
Server’s IP address. TCP/IP uses IP addresses to identify hosts, but users often use symbolic names, such
as computer names. The WINS (Windows Internet Naming Service) Server, which uses NetBIOS over
TCP/IP, contains a dynamic database to map computer names to IP addresses.
Console password
—
If you specify a password, write it down for safe keeping. If you forget the password,
you will need to use the reset password button to reset it. Only use the console password when absolutely
necessary.
NOTE
Write your console password in a safe place before setting the password.
Server Configuration—LAN
1.
From the
MAIN MENU
, use the arrow keys to select
Server
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
MAIN MENU
------------------------------------------------------------------------------
[Server]
Port seTting sAve Utility Restart Exit
Examine/modify async server node/table configuration
Enter: select ESC: previous menu
2.
From the
SERVER MENU
, select
Lan
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
SERVER MENU
------------------------------------------------------------------------------
Info.
[Lan]
Adv. Host_table Route_table User_table Quit
Examine/modify async server basic configuration
Enter: select ESC: previous menu