CN2510
Setting Up Dialin/out
10-14
Optional Welcome Message
Open
Port Menu
Welcome_MSG
to set up a welcome message to greet dial-in users.
1.
From the
MAIN MENU
, use the arrow keys to select
Port
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
MAIN MENU
------------------------------------------------------------------------------
Server
[Port]
seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2.
From the
PORT MENU
, select
Welcome_MSG
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Mode Line mOdem
[Welcome_MSG]
Quit
Edit the hello message for Terminal port
ESC: back to menu Enter: select
+-----+
|
no
|
vvvvvvvvvvvvvvvvvvvvvvvvvvvEnable hello message : [ no | yes |vvvvvvvvvvvv
<<< Moxa Async Server >>>
+-----+
3.
Select
yes
to edit the welcome message.
4.
Press
Esc
to return to the
PORT MENU
.
Configuring Optional Local User Information
Open
Server Menu
User_Table
, to configure local user authentication information. If you set
Incoming
PAP check
or
Authentication type
as
Local
instead of
Server
, you will need to configure the
User_table
for
user authentication. The
User_table
page is also used to activate the call-back function.
1.
From the
MAIN MENU
, use the arrow keys to select
Server
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
MAIN MENU
------------------------------------------------------------------------------
[Server]
Port seTting sAve Utility Restart Exit
Examine/modify async server node/table configuration
Enter: select ESC: previous menu
2.
From the
SERVER MENU
, select
User_table
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
SERVER MENU
------------------------------------------------------------------------------
Info. Lan Adv. Host_table Route_table
[User_table]
Quit
Examine/modify the user/password table
Enter: select ESC: previous menu
