CN2510
Setting Up Dialin/out
10-12
Setting
Value
Notes
Necessity
Source IP address IP address for the port CN2510 will automatically assign an IP address
for the port. We recommend leaving this space
blank.
Optional
IP netmask
IP netmask
CN2510 automatically assigns the netmask
255.255.255.255. We recommend leaving this
space blank.
Optional
TCP/IP
compression
Yes/No
Depends on whether the remote user’s
application requests compression.
Optional
Inactivity time
0-99 minutes
Idle time before the port is disconnected
automatically. If set to 0 minutes, the port will
not disconnect.
Optional
11.
Press
Esc
to return to the
PORT MENU
.
Configuring the Serial Ports
Open
Port Menu
Line
to configure serial port settings.
1.
From the
MAIN MENU
, select
Port
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
MAIN MENU
------------------------------------------------------------------------------
Server
[Port]
seTting sAve Utility Restart Exit
Examine/modify async server ports configuration
Enter: select ESC: previous menu
2.
From the
PORT MENU
, select
Mode
, and then press
Enter
.
CN2510-8
CN2510-8_5631 V2.0
PORT MENU
------------------------------------------------------------------------------
Mode
[Line]
mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
Enter: select ESC: previous menu
3.
The
Line
page has pop-up selection lists for
Port
,
Speed
,
Bits
,
Stop
,
Parity
,
FIFO
,
RTS/CTS
,
XON/XOFF
, and
Discon. ctrl
for each serial port. Each item is described in detail below the figure.
CN2510-8
CN2510-8_5631 V2.0
------------------------------------------------------------------------------
Mode
[Line]
mOdem Welcome_MSG Quit
Examine/modify asynchronous port configuration
ESC: back to menu Enter: select
Port Speed Bits Stop Parity FIFO RTS/CTS XON/XOFF Discon. ctrl
01 [
115200
] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
02 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
03 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
04 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
05 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
06 [115200] [8] [ 1 ] [None ] [yes] [yes] [no ] [None ]
Setting
Value
Notes
Speed
50 bps to 921.6 Kbps
Transmission rate
Bits
5, 6, 7, 8
Data bits
Stop
1, 1.5, 2
Stop bits
Parity
None, Even, Odd, Mark, Space
Odd, Even, Mark, Space
FIFO
Yes, No
First In First Out Device
RTS/CTS
Yes, No
Hardware Flow Control
