- 25 -
4.2.4
Vehicle Information Check
In this page, you can check whether MDAS-5 is receiving vehicle data properly.
4.2.4.1
Verify Speed Signal
Start the engine and drive slowly in a safe place to see whether speed is
corresponding with the vehicle’s speed gauge. If it is not, you can simply
adjust it.
Drive and maintain the speed around 40km/h (24mi/h). Click the first
“Correction” button on the right. Then MDAS-5 will set a new speed.
4.2.4.2
Verify Turn Signal
The arrow icon will be ON, only if you are using turn signal for left or right
direction respectively. If the arrow icon is always ON, click the second or
the third “Correction” button to change signal polarity.
Make sure that the arrow icon is ON only when you are using turn signals.
