Movon MDAS -10 User Manual Download Page 1

Page: 1 / 23

(Movon Driver

Assistance System – 10)

Thank you for purchasing Movon Advanced Driver Assistance-10(MDAS-10).

Please read the manual carefully before installing and using MDAS-10.

MDAS-10 is a single camera-based driver assistance system. The product focuses on assisting drivers by preventing drowsy or
reckless driving, and recording driving information with the three functions listed below

Entering calibration mode

Lane departure warning(LDW)

Provides Lane Departure Warning (LDW) for safe driving.
It alerts the driver with sound and visual warnings and helps to regain direction if the driver departs lanes
unintentionally. (*activated at 60 km/h (38 mph))

2 Channel HD Dash cam

Records scenes before and after an accident along with imminent crash situations based on gravity
sensor and 720P recording performance. MADS-10 can record rearview scenes (480P) with an external
back-up camera and the screen can be used as a rearview display.

Digital Tacograph

Logs 10 types of data related to driving information such as speed, break usage, RPM, GPS location,
accumulated mileage, daily mileage, etc. Can benefit fleet managements and improve drivers’ driving
behavior as a result of reducing accidents and saving fuel.

1) Introduction

1. About MDAS-10
2. Specification
3. Components
4. Part description

2) Installation

1. Cabling overview
2. Installing
2.1 Installing rear-view cameras
3. Calibration

3) Function

1. Lane departure warning
2. Dash cam
3. Digital tachograph

4) Operation

1. Set-up menu

5) Warranty information

Any inappropriate

illegal activities or violation of traffic rules

on the roads are drivers’

responsibility

. Movon Corp.

will not compensate any damage nor accept responsibility related to behaviors mentioned.

After attaching the optional rear camera to preferred location on the rear windshield,
connect camera cable to the main cable’s 2.5ø slot.

press Calibration icon after MOVON logo disappears

After the car engine’s on,

Initial calibration screen is the same as the picture on left.
Press Calibration once more to proceed to configuration.

If the rear screen converts into the full screen in the PIP situation, LDWS should be not activated.

Users can change recording time in DVR Setting.

Caution

Before inserting or separating micro SD card, please turn off MDAS-10. If you do not, the recording images can become corrupted.
It is recommended for micro SD card’s reliability to low-level format the SD Card periodically (approximately every 3-4 months).

Caution :

If using an external rear camera outside of the car, ensure that the external
rear camera’s connector is following MDAS-10’s cable pin specification indicated
on the picture.

In addition, if the camera’s power consumption exceeds 5V, it will be powered from
a separate power source(eg. rear lamp cables)

Please be aware of Movon’s policy that private information and traffic related laws are users' responsibility.

MDAS-10 only gives warnings to drivers. The final decision to maneuver/control shall be made by drivers themselves.

Customer service incurred by controlling while driving or damaging/revamping will not be guaranteed by Movon’s policy.

The manual can be modified without notification. Explanations and images may not be up-to-date on the user manual for
upgrading or editing purposes.

The product software is able to be modified for upgrading for better performance without informing in advanced.
Please refer to the

http://www.movon.co.kr or http://www.mdas.co.kr

for latest updated information.

Table of contents

1.Introduction - 2) Specification

1.Introduction - 4) Part description

1.Introduction - 3) Components

1.Introduction - 1) Introduction

Major functions

CPU

Cortex A8 Series

MDAS camera

Screen

4.3 inch, 480x272 pixel, touch screen panel

Camera

1M pixel, Diagonal 103.2°C

Power

Video

Audio

MP4(H.264 codec: Front-720P, 30fps, R

ear: 480P, 15~30fps)

AAC/MP3

Format

Camera

Lens

Angle adjuster

Speed

Distances between the wheels

Double sided tape

Camera cable

Body

110 x 85 x 70 mm

135 x 85 x 20 mm

Size

Storage

DC 12V/24V support (Consumption: 900mA)

4~32GB Mic

ro SD card support

Operating Temperature

-20~65˚C

Etc

Built-in G-sensor, Mic, Spea

ker, Wi-Fi(Option), Ext

ernal GPS,

Input

Power port (Micro USB or Rear Connector), Camera port(micro USB)

MDAS main

User manual

GPS modu

(Option)

Universal 4-pin

mount (Option)

Rear-view camera

(Option)

Micro SD car

d 8G

& reader

MDAS cable

2.Installation - 1) Cabling overview

2.Installation - 3) calibration

Lane Departure Warning

1. LDW alerts the driver with sound and visual warnings when the vehicle departs from its lane unintentionally when
driving over 60km/h(38 mph).

2. When MDAS-10 recognizes the lane markings in the environment while driving over 60km/h, the LCD of main body displays green
lines when the car stays in its lane and displays red lines when the car departs its lane.

3. You can change the distance between the vehicle and the lane markings through sensibility adjustment.
(Refer to Set-up menu in Operation chapter)

4. If you want to turn off a function of LDW, you can disable in ADAS mode in Set-up menu in Operation.

5. LDW will not be activated if you turn on left or right blinkers.
(If the LDW is activated, please read the direction light connection of FAQ)

1. Normal mode: Records front and rear driving scenes simultaneously in real-time and recorded videos can be found in ory_rec folder.

2. Event mode: When the impact is detected by G-Force sensor, the videos 10 seconds before and after of the event are saved in

evt_rec folder.
3. Manual mode: If you press on the screen, the videos are recorded for 30 seconds from the time and saved urs_rec folder.
4. Rear camera: Rear scene can be checked through optional camera and the rear screen can be checked by PIP
(Picture in Picture) through button on the LCD of main body.(Press the PIP screen to switch into the full screen)

6. Recorded video play: You can play recorded videos through MDAS-10, MV(MDAS Viewer), VLC player, and players that play avi

files. (MV is included in SD card also it can be downloaded in Notice on www.mdas.co.kr. You can find the player in Notice board.)

7. MDAS DVR viewer works normally on computers with 2Ghz CPU and 2GB RAM.

8. File name can be expressed like ORY_20131201_205940_D (Type, date, time, D:dual S:single camera).

(ORY : Ordinary video recorded in real-time, EVT: Event video recorded, USR: Manual video)

Users can allocate recording spaces of the normal mode/event mode/manual mode and format the SD card.

1. MDAS-10 digital tachograph is designed in compliance with national standard and has obtained certification.

2. The driving information such as speed, mileage, time, RPM and GPS location can be transferred to MDAS-10 via

CAN or analog communication.
3. The driving information can be displayed after touching the DTG button as shown above.

4. DTG viewer needs to be downloaded from

http://www.mdas.co.kr in order

to check the stored driving information.

5. You can check the moving route and location in real time via Fleet Management Service by MOVON provided.
If you need the Fleet Managements Service, please call (+82) 2-2050-4676
6. All driving data can be recorded up to six months and the last ten seconds of the event data will be also recorded automatically.

5. Recording time(

Event videos)

3.Function - 1) Lane Departure Warning

062 Km

0.81 m

1.24 m

If REC button shows blue color

, it indicates video is not recorded. So, please ensure that the icon is red before using.

Digital Tachograph

Record Setting

3.Function - 2) 2CH Dash cam

3.Function - 3) Digital Tachograph

Time Setting

Operation

- 1)

Set-up menu

Tachograph Setting - 1

Tachograph Setting - 3

Tachograph Setting - 2

/ MDAS-10’s Main Screen

G-Force sensor setting

LCD’s display setting

LDW setting - 2

LDW setting - 1

Wi-Fi Setting - 1

Miscellaneous Setting

Quick Guide

-3-

-4-

-5-

-6-

-7-

-9-

-10-

-11-

-13-

-15-

-16-

-17-

-18-

-19-

-20-

3
4
5
6

7
8

14
15
16

MDAS -10

2.Installing - 2.1)

Installing rear-view cameras

Use auto off : Turns off the LCD display 1 minutes after MDAS-10

is powered on.

Use guide Line : Checks if LDW-related virtual Line is displayed.

Operation

- 1)

Set-up menu

Operation

- 1)

Set-up menu

Operation

- 1)

Set-up menu

Product Warranty

Product Warranty Card

MDAS-10

-21-

The warranty period applies from the date of purchase by the first customer and is transferable only between end-users.
The product warranty card and a copy of dated receipt “Proof of Purchase” are required. Otherwise,
MDAS-10 is not covered by the limited product warranty.

The warranty covers only manufacturing defects only which are occurred within warranty period.

We confirm this product warranty complies with Consumer Laws under Korea Consumer Agency.

After-sales Service center location : Movon Corp. ( T. +82 (02) 2050 4640 )

Please download and back up all saved data before sending MDAS-10 to our After-sales Service center. We exclude all
liability for loss of data.

Warranty Period / MDAS-10 : 1 year : 20,000Km / Movon-providing microSD card : 3 months
Movon-providing rear view camera : 6 months

Model

Serial No.

Customer

Name

Phone

Address

Name

Address

Seller

Purchasing Date

Touch LCD

MINI USB

GPS

Reset hole

Screen On/Off button

Micro SD card slot

Main cable port

Do not modify nor disassemble the product.
Do not install in disregard of installation instructions. It is recommended to go to a professional installation shop.
Do not operate while driving, it is prohibited by law. If it is necessary, operate after stopping at a secure area.
Do not sepa
If recorded videos are broken due to users mishandling, the damaged video is not guaranteed to recover.

rate micro SD card from MDAS-10 while the power is on. Separate after turning off MDAS-10 if it is necessary.

Do not touch the screen directly with sharp objects. Movon is not liable for damage of the screen.
Operating temperatur

e is -20~65℃(4~149 ℉). MDAS-10 may not ope

rate properly and be damaged in excess

of the temperature parameters.
Lane departure warning system may not work properly due to camera locations and angle, excessive tint, etc.

* Precaution

Step : 1 Remove the adhesive tape from the camera
and attach to the center of front windshield
from inside. And connect camera cable to the main
cable
* The location of camera that should be within

+/-5cm f

rom the center.

Step 2 : Remove the adhesive tape from MDAS-10
body and attach to a preferred location or
attach to the mount using 4 pin connector.

Step 3 : Connect CAN High/Low cables to those
corresponsive cables. If CAN signal is
unavailable, connect speed, left/right turn
signals, RPM(if needed) directly into
corresponsive vehicle cables.

Step 4 : Find accessory/ignition power(ex: clock, cigar) in fuse box and connect to ACC cable and fix the gr

ound(GND)

cable on a

uncoated metallic part of the car body.

ep 5 :

Connect the main cable to MDAS-10 after finishing connecting signals with the c

ar and GPS.

-8-

2.Installation - 2) Installing

6 hours

13 hours

26 hours

16G

32G

KC Certified : MSIP-CMM-MVN-MDAS10

Driver Registration : Registering a driver
Driver Select : Selecting a driver
Driver Delete : Deleting a driver

Type : Car type

ID Number : Car VIN Number

Calibration
If the current car data(Speed, RPM) is not correct, users
can modify changed values.

Registration : Car registration no.
Provider : Registration no. of Transport Operator

Advanced : Ordinary or event recording On/Off.

Voice recording On/Off.

Memory : Memory-size setting
You can format SD card in this menu.

for recording hours.

Basic : Video quality and recording hour unit change.

The image shows all available menu settings. However,
You may have limited access to menu settings on MDAS-10.

Export : Exports driving information to an external device
Export Info : Exported Information

Checking if GPS data/ time is functionoing and setting time.

Change sensitivity of G-Force sensor. The lower numbers
in Step, the more sensitive.

Select the auto maker (ex: GM, Ford, etc.), and then select

the vehicle model in accordance with year of manufacture.

If the vehicle model is not listed, go to www.mdas.co.kr and

file for the vehicle. Then, insert micro SD card after copying

the data file on it.

* Turn off power before inserting/separating micro SD card.

* If the vehicle’s signal is not correct, you can modifty

the data by clicking “modify” in the final screen. So,

if a car signal is not received from the supposed data

connection, you can select a different type of data

you need.

Enable WiFi : Checks if Wi-Fi is activated.

Adjust the camera knob to locate the yellow line on the

horizon or between the red lines. You can enlarge the
image by clicking the scene frame.

2.Installation - 3) calibration

Firmware Update : Updates a Firmware.
Default Setting : Initializes MDAS-10.

Setting for LDW-alerting sound.
Multiple choices available from A to C.

Sensitivity setting for LDW.

The closer each line is towards a car, the more sensitive.

Adjust yellow dot line to locate on the vanish line

Adjust the hood line to locate the boundary between the road
and vehicle hood. Then input the vehicle width (From the edge
of right tire to the edge of left tire on the road) and Input the
camera height (From the road to the camera lens)

Lane departure warning(LDW) sensitivity adjustment.

If you want to change the warning timing, please click the
lane marker. Default value is 0 (at 3) and every unit changes
10 CM length from its side.

Test signal connections

Turn on right/left turn signal and check if red light is on
the screen. And press brake pedal and check if the red light
is on the screen.

In order to correct speed value, please press “40km” at
24mph(40km/h). Likewise, for RPM, press “2000rpm) at
2000rpm

-12-

-14-

If the camera is attached away from the center line of
the vehicle, please adjust how far it is located from the
center. Its unit is centimetre. (- is left side, + is right side)

Test signal connections

OSD Setting

Data/time, speed are displayed on MDAS-10’s LCD.

Select speed unit, Km/h or mph (Initial value is Km/h)

* Icon explanation

Voice recording is unavailable

SD card is not inserted

SD card has a problem