Chain
Anchor
Slot
During connection to the
tree, place hand here
while holding the Feeder
Hoist against the tree.
Chain Anchor
Bracket
Step 1: Attach the Feeder Hoist to a tree
Hold the Feeder Hoist boom assembly between the winch and
cable anchor (See
Figure 5
). Position the tree stand-off bracket
at the desired height above the ground and wrap the chain in a
horizontal plane around the tree. Remove all slack possible and
insert the appropriate chain link into the slot on the chain anchor
bracket (
Figure 5
). Verify that the chain link is fully engaged in
the Chain Anchor Slot. Pull down on the Feeder Hoist assembly
to securely bind the hoist to the tree.
Step 2: Attach your gambrel or feeder (not included)
to the cable winch hook.
Be sure the hook safety latch securely closes behind the gambrel.
Disengage the anti-reverse ratchet and lower the hook as necessary
to your game animal or feeder. Engage the anti-reverse ratchet
and carefully lift the animal or feeder to the desired height using
the hand winch.
Always disconnect the Feeder Hoist from the tree when not in use
and store appropriately.
01262016 / MFA-13102
Our Service Department will gladly answer any questions you have.
Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.
www.moultriefeeders.com
Figure 5
Failure to read and follow all instructions may result in serious injury or death.
• Never exceed the maximum capacity of 300 Lbs.
• Use only for lifting harvested game animals or game feeders.
• Do not use on trees or posts less than 7 inches in diameter.
• Do not use on trees larger than the chain length provided.
• Always verify the anti-reverse ratchet lever is properly engaged before lifting.
• Never allow anyone to stand below a lifted object.
• Due to some tree irregularities, verify the hoist is secure and stable on the tree before operating. Do not use if tree or post is not suitable.
• Always inspect all components for damage before use. Do not use if any damage is found.
OPERATING THE FEEDER HOIST
D
DO NOT EXCEED
200 LBS OF FEED
WARNING
Manufactured for Moultrie by
Viking Solutions, LLC
Hanging Feeder Hoist_MFA-13102_Manual_ENGLISH_1-26-16.indd 2
1/26/16 4:32 PM