10s
30s
1m
5m
SET TIME
ENTER
SET DATE
SET CAMERA ID
ENTER
SET MULTI-SHOT*
ENTER
ERASE IMAGES/FORMAT SD CARD
ENTER
ENTER
• HIGH
• LOW
• VIDEO
AM
PM
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
10
8 8 : 8 8
• ON
• IRAIM
• SETUP
OFF
1 1 : 1 1
AM
SET CAMERA TIME & DATE
SET CAMERA ID
SET MULTI-SHOT
ERASE IMAGES / FORMAT SD CARD
ENTER
ENTER
ENTER
ENTER
Setting Time and Date
While the camera is in the Setup mode,
the LCD display will show the time.
Press the
Enter
button and the selection
will flash. Use the
UP/Down
buttons
to change the selection. Press the
Enter
button to lock in the selection and move
to the next selection. Repeat the process
to set the year, month and day.
Setting Time Delay
To set the time delay, slide the
Delay
switch to the desired time.
There are 4 time delay settings:
10 seconds
30 seconds
1 minute
5 minutes
Setting Camera ID
Use the
Up/Down
buttons to choose
between nine different numbers
(1-9) to help identify your cameras
(i.e. “CAMERA 3” will be marked on the
info strip given 3 was selected). Press
Enter
to lock in your selection and
move to the next selection.
Setting Image Quality or Type
Slide the
Resolution
switch to the
desired setting.
Choose one of 3 settings:
High Photo
Low Photo
Video
Reset Picture Count/Erase Images/Format Card
After Multi-Shot has been set, you can reset the picture
count on the camera. Use the
Up/Down
buttons to choose
between Yes or No. Press the
Enter
button to confirm the
selection.
“Yes” will reset file number to start from 0001 and
erase
all images stored on the SD card.
NOTE: This will also format your SD card for use in
your camera.
Setting Multi-Shot
Use the
Up/Down
buttons to choose between settings.
Choose how many pictures you would like captured in a
sequence when the camera is triggered (1 or 3).
Available options are:
1 (OFF)
- Single photo taken per event.
3 PHOTO
- Three photos are captured per event with an
approximate one second delay between each capture.
Press
Enter
to lock in your selection and move to the
next selection.
UP Button -
Increase individual value
ENTER Button -
Confirm a selection
DOWN Button -
Decrease individual value
A-SERIES DIGITAL GAME CAMERAS
IV
ON -
A countdown from 10-0 will apper on the display.
After countdown, the camera will enter Capture Mode
based on user settings.
10s
30s
1m
5m
SET TIME
ENTER
SET DATE
SET CAMERA ID
ENTER
SET MULTI-SHOT*
ENTER
ERASE IMAGES/FORMAT SD CARD
ENTER
ENTER
• HIGH
• LOW
• VIDEO
AM
PM
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
• ON
• IRAIM
• SETUP
OFF
10
8 8 : 8 8
• ON
• IRAIM
• SETUP
OFF
1 1 : 1 1
AM
AIM -
Use this setting to find your desired detection area.
Display will show “lr” indicating that IR AIM test mode is
active. The red Status Indicator will light when motion
is detected.
SETUP -
Slide switch here to begin the setup process.
The display will show currently set time. To setup
the camera, follow the Menu Flow Chart below.
OFF -
No camera or display activity.