• Pulse: this instantaneous speed allows you to better control of the degree of mixing
and F and evenness of your recipes.
• For models with speed selector
(G)
.The instantaneous speed is obtained by
successive movements of the selector
(B)
to the 'pulse' position. For models with
speed selector (H), press the button in the middle of the selector
(B)
.
• For a more even blending, first add the liquid ingredients and run the blender for a moment
before adding the solid ingredients.
• Before first use, clean the blender jug and the accessories with warm soapy water.
•
Important note:
Switch the speed selector
(B)
to “
0
” before putting the blender jug or
the accessories on the body of the blender.
• The blender will only start if the accessory is correctly positioned on the motor unit.
• Do not operate the blender if the lid is not in place.
1. BLENDER JUG (C)
•
Dampen the seal (C2)
and position it correctly on the blade unit
(C1)
: the 3 seal joints
must be visible once the seal is in place. If it is positioned in the other direction, you will
not be able to lock the blade unit on the jug.
(Fig. 1)
•
Place the assembly (C1+C2)
on the base of the jug
(C3)
. Lock it by rotating the blade
unit through a quarter turn in the clockwise direction.
(Fig.1)
• Add the ingredients to be blended into the jug without exceeding the maximum level
indicated:
- 1.25 L for thick mixtures
- 1 L for liquid mixtures
• Place the lid
(C4 + C5)
on the blender jug and lock it.
• Place the blender
(C)
on the motor unit of the blender
(A)
; there are 4 possible positions.
DESCRIPTION
A
Motor Unit
B
Speed selector
C
Blender jug assembly:
C1
Blade unit
C2
Watertight seal
C3
Graduated blender jug
C4
Lid
C5
Measuring Cap
Accessories according to models:
D
Grater
E
Spice mill
F
Accessories lid
The accessories contained in the model you have bought
are represented on the label located on the top of the packaging.
PRACTICAL TIPS
USING YOUR APPLIANCE
5
• Plug in the appliance and turn it on by turning the speed selector
(B)
to the desired
position.
- low speeds: for liquid preparations.
- high speeds: to homogenise preparations.
• Add the food or liquid by opening the measuring cap
(C5)
. Replace the cap and turn the
speed selector
(B)
to the desired position or give a few pulses using the 'pulse' function.
• Make sure the lid is locked on the blender jug when you pour in your preparation.
• To stop the blender, turn the speed selector
(B)
back to position “
0
”.
• Do not use the blender with the blender jug for more than 3 minutes at maximum speed.
2. ACCESSORIES (ACCORDING TO MODEL)
•
The grater (D)
can be used to grind nutmeg and coconut (first cut into cubes) to a
powder, in up to 30 seconds and hard cheese (eg. 60 g parmesan...).
•
The spice mill (E)
can be used to grind spices (eg. coriander...).
• These accessories come with a safety lid
(F)
which prevents access to the moving
blades.
• Add the ingredients to the jug
(D or E)
. Lock the lid
(F)
onto the jug of the accessory
then place the assembly on to the motor unit of the blender
(A) (Fig 2)
.
• Plug in the appliance and turn the speed selector
(B)
to the desired position or give
a few pulses using the 'pulse' function.
• Hold the lid down
(F)
during operation.
• To stop the blender, turn the speed selector
(B)
back to position “
0
”.
• Turn the accessory assembly over on the work surface before unlocking the accessory
lid
(D-E) (Fig 3)
.
• You can then collect the preparation in the lid itself which serves as a container.
•
Handle the blades with caution, they can cause injury.
• Unplug the blender.
• Remove the jug and wash it under running water as well as the lid.
• Wash the accessories in hot water with a few drops of liquid soap or in the
Recipes
Quantities
Operating time
Accessory
Apricots, dry fruits
Hazelnut kernel
Parmesan
Nutmeg
Coconut
Cilantro
100 g
40 g
60 g
2 or 3
60 g
40 g
8 s max
Pulse
30 s max speed
30 s max speed
30 s max speed
30 s max speed
E
E
D
D
D
E
CLEANING
6
EN
