![background image](http://html.mh-extra.com/html/moulinex/mastermix-lm800g/mastermix-lm800g_manual_1839808008.webp)
11
•
Function " Smoothies"
This function is used to prepare smooth milkshakes and fruit cocktails. The
speed is pre-programmed for best results. To use this function, turn the control
knob to
, and press the
"Smoothies"
button
(B)
to start the appliance. To
stop it, press the
"Smoothies"
button
(B)
again.
•
Function " Ice crush"
You can use this function to crush ice finely with pre-programmed operating
cycles and speed. To use this function, turn the control knob to , and press
the "Ice crush" button
(C)
to start the appliance. To stop it, press the
"Ice
crush"
button
(C)
again.
• Your appliance comes with a microprocessor that controls and analyses the
operating power.
If the load becomes too high, your appliance will stop
automatically.
To restart your appliance, turn the control knob to , unplug
the appliance and remove some of the ingredients from the blender jug.
Allow your appliance to cool down to room temperature. Plug it in again. You
can then select the desired speed or function to complete your preparation.
• Depending on the nature of the ingredients, you can use the blender jug to
prepare up to
*
1.5 L for thick mixtures
*
1.25 L for liquid preparations
• You can prepare finely blended soups, cream soups, stewed fruit, light batter
(pancakes, fritters, Yorkshire pudding batter, etc.), milkshakes, smoothies,
cocktails, etc.
• If ingredients stick to the sides of the jug when blending, stop the appliance.
Remove the blender jug from the motor unit, and push the food down onto
the blades using a spatula and put your blender jug back to continue your
preparation.
• Always pour the liquid ingredients into the blender jug first, before adding the
solid ingredients, without exceeding the maximum level.
• To add ingredients while blending, remove the measuring cup
(e5)
from the
lid
(e4)
and add the ingredients through the feeder hole.
• For finely crushed ice, use a maximum of 6 to 10 large ice cubes using
"Ice
crush" function. There is no need to add water.
ADVICE
0
0
0
10
BEFORE THE FIRST USE
• Clean all the parts
(E)
with warm water and washing up liquid except for the
motor unit
(A)
which must never be immersed in water or placed under
running water (see § Cleaning).
CAUTION: The blades are extremely sharp; handle them with caution when
using or cleaning the appliance.
• Make sure all the packaging has been removed before operating the
appliance
•
Important note:
Turn the control knob
(D)
to
before placing the blender
jug on the motor unit
(A)
.
• The appliance will start only if the blender jug is positioned correctly on the
motor unit.
•
Do not operate the appliance if the lid is not in place.
• Fit the gasket seal
(e2)
on the blade unit
(e1) (Fig.1)
.
• Place the assembly
(e1+e2)
on the base of the jug
(e3)
. Lock it by rotating
the blade unit through a quarter turn in an anticlockwise direction
(Fig.2).
• Introduce the ingredients to the assembled jug.
• Place the lid
(e4)
on the jug. Place the measuring cup
(e5)
in its slot on the
lid.
• Place the blender jug assembly
(E)
on the motor unit
(A)
. The blender jug can
be placed in two positions: jug handle to the right or the left of the motor unit
(Fig. 3).
• Once the blender jug is positioned correctly on the motor unit, plug in the
appliance and turn it on using the desired function.
•
Speed selection:
Turn the control knob
(D)
to choose the desired speed; the
speed increases gradually between
min " "
and
max " ".
You can change
this speed as required during preparation.
•
"Pulse" function:
Turn the control knob
(D)
to the
"Pulse"
position. Using a
succession of pulses gives finer control over the degree of blending for
precise preparations. In this position, the appliance starts directly on
maximum speed. It stops as soon as you release the knob.
ASSEMBLING AND FITTING THE JUG
USING YOUR APPLIANCE FOR THE FIRST TIME
0