![background image](http://html1.mh-extra.com/html/moulinex/infiny-force-dd863g10/infiny-force-dd863g10_manual_1840155014.webp)
IMPORTANT: Do not operate the appliance when empty.
- Before mixing hot preparations, remove the container from the heat source. For
best results, there is no need to move the blender shaft around in the prepara-
tion. Instead insert the shaft in the centre of the container with the blender
head submerged halfway down in the food.
- For stringy ingredients (leeks, celery, etc.), clean the shaft regularly during the
preparation, ensuring that you follow the safety instructions for dismantling
and cleaning the appliance.
- When making fruit-based preparations, slice the fruit and remove the cores and
any stones beforehand.
- Do not operate the appliance to prepare hard ingredients (sugar, chocolate, cof-
fee, ice-cubes).
-
Do not operate the mixing foot (C) at TURBO speed for more than 20 seconds.
• Mini chopper 150 mL (depending on model): FIG E & 5
- Fit the blades (E2) onto the drive pin of the bowl (E1).
- Place the ingredients in the bowl (E1) then fit the inner cover (E3) then the lid
(E4).
- Fit the motor unit (A) onto the lid (E4).
- Plug in the motor unit (A) and press the speed start button (B2) and process
food.
- Remove the motor unit (A) then the lid (E4) then the inner cover (E3).
- Remove the blades (E2), holding it by its plastic part.
- After use, remove the ingredients.
-
Do not operate this accessory when empty or for more than 10 seconds.
• Chopper 500 mL (depending on model): FIG F & 6
- Place the bowl (F1) on the anti-slip base (F4).
- Fit the blades (F2) onto the drive pin of the bowl (F1).
- Place the ingredients in the bowl (F1) then fit the cover (F3).
- Fit the motor unit (A) onto the cover (F3).
- Plug in the motor unit (A) and press the speed start button (B2).
- Remove the motor unit (A) then the cover (F3).
- Remove the blades (F2) holding it by its plastic part.
- After use, remove the ingredients.
-
Do not operate this accessory when empty or for more than 30 seconds.
• Multi-wire whisk (depending on model): Fig G & 7
- Fit the multi-wire whisk (G2) onto the reducer (G1).
- Fit the reducer (G1) onto the motor unit (A).
- Turn until it is locked in place.
- After use, unscrew the reducer (G1) and remove the whisk (G2).
14