![background image](http://html1.mh-extra.com/html/moulinex/fresh-express-max-dj81251/fresh-express-max-dj81251_manual_1840136015.webp)
15
Fitting the dicing accessory:
• Place the dicing cone in the opening at the front of the holder
(D)
, the cone should be correctly
positioned all the way into the drive
(fig. 3)
.
• Then position the dicing ring with the safety flap open, centring the safety hinge on the cone
holder tube
(fig. 9)
.
• Check that the dicing ring is correctly attached to the base of the cone holder.
• Close the safety hinge over the cone holder
(fig. 10)
.
• Use the dicing function by inserting the ingredients through the cone store feeder.
• Remove the dicing accessory by pulling the tab positioned at the top of the safety hinge
(fig. 11)
.
Tip: to unlock the safety hinge E5b more easily, move it upwards with one finger while
simultaneously pulling the tab forward (fig.11).
F.A.Q.
Questions
Answers
• "The Cone is not properly held in
place in the holder, I can't hear a
click".
• "I can't remove the accessory after
use".
• "The cone holder is quite hard to
fit and remove, is this normal?"
Simply make sure that the cone is slotted all the way
onto the drive
(fig. 3)
. Press the on/off button first
before inserting food into the feed tube to ensure the
cone is correctly locked into place
(fig. 4)
.
To remove the cone after use, unlock
(fig. 6)
the holder
then relock it
(fig. 7)
and the cone will fall out by itself
(fig. 8)
.
Yes when the appliance is new. With use it will become
easier to install and remove.
EN