![background image](http://html1.mh-extra.com/html/moulinex/fresh-express-max-dj81251/fresh-express-max-dj81251_manual_1840136014.webp)
14
• If the power cord is damaged, it must be replaced by the manufacturer, an approved after-sales
service or a similarly qualified person in order to avoid any danger.
• Do not use cones or spare parts other than those provided by the approved after-sales centres.
•
Do not operate your appliance for more than 10 min.
• This appliance is designed for domestic use. In the event of any commercial use, inappropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility and
the guarantee will not apply.
• Wash the accessories (cones, cone holder and pusher) with soapy water. Rinse and then dry ca-
refully.
• Choose the cone that corresponds to the required use.
• Position the cone holder
(D)
on the motor unit
(A)
by giving it a quarter turn to the left
(fig.
1 & 2)
.
• Place the chosen cone into the opening at the front of the holder
(D)
, the cone should be cor-
rectly positioned all the way into the drive
(fig. 3)
.
• Plug in the appliance.
• Select the required speed (slow or turbo) and then press the start/stop button
(fig. 4)
.
• Insert the food through the feeder tube
(D)
and push the food down gently using the pusher
(C) (fig. 5)
.
TIP: There is no need to press down hard on the pusher to obtain good slicing results; this
type of use will slow down the motor; simply ensure that the ingredient remains in contact
with the cone.
• To change the cone, turn the holder
(D)
a quarter turn to the right
(fig. 6)
, then return it to
the upright position
(fig. 7)
. Remove the cone
(fig. 8)
.
RECOMMENDATIONS FOR USE
The slow speed is intended for hard foods (e.g. parmesan, chocolate) to be grated with cone E3
(yellow).
The slow speed is also recommended for soft or fragile foods (pears, avocadoes, cooked beetroot).
3. BEFORE USING FOR THE FIRST TIME
WARNING: The cone blades are extremely sharp, handle the cones carefully always holding
them by the plastic part.
4. USE
WARNING: before running the appliance, always make sure that the cone is perfectly
positioned on the motor rive unit (fig. 3) then first of all press the On/Off button before
inserting food into the feeder tube (fig. 4).