Moulinex FACICLIC LM301141, Manual

Page: 12 / 30

8
•
The blades are very sharp: handle
them with caution to avoid injury.
•
Never use the blender or its
accessories without ingredients and
never pour boiling liquids into the
jug.
•
Always use the blender jug with its lid
(c4) .
•
Always pour the liquid ingredients
into the jug first, before adding the
solid ingredients, without exceeding
the maximum level.
•
Never place your fingers or any
other object in the blender when the
appliance is running.
•
Do not use the bowls as containers
for freezing, cooking or sterilisation.
•
Do not use the blender for more
than 3 minutes continuously.
•
Place the blender on a flat, stable,
heat-resistant, clean and dry
worktop.
•
Do not let long hair, scarves, ties, etc.
hang over the blender jug or
accessories when in operation.
•
Do not use the blender outside in the
open air.
•
Do not remove the lid (c4) before
the blades have stopped
completely.
•
Never use this appliance for
blending or mixing items other than
food ingredients.
SAFETY LOCKING
USING FOR THE FIRST TIME
USING YOUR APPLIANCE
The appliance can run only when the
jug
(C) or accessories (D or E) are
correctly positioned and locked on
the motor unit
(A) .
•
Before using your appliance for the
first time, clean all the accessories
(C, D, E, F) in warm soapy water,
except for the motor unit (A) .
CAUTION: The blades are
extremely sharp; handle them
with caution when using or
cleaning the appliance.
•
Make sure all the packaging has
been removed before operating
the appliance.
•
Important note: Turn the speed
selector
(B)
to “0” before placing
the blender jug or accessories on
the motor unit.
•
The appliance starts only if the jug
or accessory is correctly positioned
and locked on its body.
•
Do not operate the blender if the
lid is not in place.
•
Moisten the gasket (c2) and position
it correctly on the blade unit (c1) :
the 3 folds of the gasket must be
visible once it is in place. If it is
positioned in the other direction, you
will not be able to lock the blade unit
on the jug. (Fig. 1).
•
Place the assembly (c1+c2) on the
base of the jug (c3) . Lock it by
rotating the blade unit through a
quarter turn in the anticlockwise
direction. (Fig. 2).
•
Introduce the ingredients into the
assembled jug without exceeding
Notice_0828485:Mise en page 1 4/06/10 12:06 Page 8