MOTU 24Ai, User Manual

Page: 56 / 92

W O R K I N G W I T H H O S T A U D I O S O F T W A R E
56
Specifying the number of computer channels
In the web app Device tab (page 15), in the
Computer Setup section, specify the number of
computer channels for streaming audio to and
from your host audio software. You might want
enough channels to cover the following:
■
Physical inputs you want to record on your
computer.
■
The physical outputs you want to send audio
playback to.
■
Any audio streams going to and from the
on-board mixer in your MOTU device
■
Any audio streams going to and from the AVB
network, if you have multiple networked MOTU
AVB devices
If you aren’t sure how many channels you’ll need,
visit the Routing tab, as explained below.
Making inputs and outputs available to your
host software
In the web app, use the Routing tab (page 16) to
map inputs and outputs to computer channels, as
demonstrated in Figure 7-1 and Figure 7-2.
Configuration presets
The presets menu (item #7 in the Devices tab on
page 14) provides many useful presets for various
host routing scenarios. These presets are a
convenient shortcut for the routing grid setups
discussed in the next few sections.
Figure 7-1: An example of routing computer channels (from host audio software) to the analog outputs on a 24Ao.