Mx350_01a_oi_e.docx / Nov-19
page 16 / 72
Screen structure in operation
The following screens are available during operation. Depending on the device version and the selected
operation mode, not all displays will be shown.
Display with unit and status bar
To switch to the next display, press the
touch screen.
Control - or Relay status are only shown with
option AO, AR, CO, CR or RL.
Large Display (4 digits)
To switch to the next display, press the top of the
screen.
This is only possible with activated parameter
„LARGE DISPLAY“.
Two-line display without units
To switch to the next display, press the top of the
screen.
Two-line display with units
To switch to the next display, press the top of the
screen.
Display with command keys
To switch to the next display, press the top of the
screen.
