Motrona DS230 Series, Safety Manual, Page: 51 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 51 / 100
7.4. Parameter Description
7.4.1. Important notes for DS240 / DS246
When using a DS240 resp.DS246 variant, the following hints must be noted:
Nr. Parameter Hints for DS240 /. DS246
000 Operational Mode Exclusively „Mode = 0“ may be used
003 F1-F2 Selection Both settings have the same effect
013 Direction1 Direction1 and Direction2 must be equal
014 Multiplier1 The setting must be „1“
015 Divisor1 The setting must be „1“
016 Position Drift1 Position Drift1 and Position Drift2 must be equal
017 Phase Err Count1 Phase Err Count1 and Phase Err Count2 must be equal
020 Direction2 Direction1 and Direction2 must be equal
021 Multiplier2 The setting must be „1“
022 Divisor2 The setting must be „1“
023 Position Drift2 Position Drift1 and Position Drift2 must be equal
024 Phase Err Count2 Phase Err Count1 and Phase Err Count2 must be equal
062 Input 1 Function To clear drift errors, Clear Drift 1&2 must be used
064 Input 2 Function To clear drift errors, Clear Drift 1&2 must be used
074 RS Selector Both settings have the same effect