Motrona DS230 Series, Safety Manual

Page: 35 / 100

Ds230_03a_oi_e.doc / Jun-15 Page 35 / 100
6.5. „Operational Mode“ = 0 (DS23x)
Mode
0
Sensor1
[X6 | SINCOS IN 1] SinCos encoder (SIN+, SIN-, COS+, COS-)
Sensor2
[X7 | SINCOS IN 2] SinCos encoder (SIN+, SIN-, COS+, COS-)
Control1
[X10 | CONTROL IN] HTL/PNP control signal (complementary)
Control2
[X10 | CONTROL IN] HTL/PNP control signal (complementary)
Achievable
Safety Level
Speed

SIL3 / PLe
Direction

SIL3 / PLe
Standstill

SIL3 / PLe
This mode (only DS23x) is used to evaluate a dual channel system, equipped with two SinCos
sensors resp. Encoders, which must be performed in accordance to chapter
5.3 .

In this operational mode a DS230 variant reproduces always the input frequency at
[X6 | SINCOS IN 1] to the splitter output [X5 | SINCOS OUT].

A DS230 variant reproduces selectively the input frequency of Sensor1 or Sensor2
to the splitter output [X4 | RS422 OUT].

The inputs at terminal [X8 | RS422 IN 1] and [X9 | RS422 IN 2] have no function.

At terminal [X10 | CONTROL IN] the inputs Control1 and Control2 are available
for control signals..