CT70104B_e.doc / Nov-15
Page 9 / 29
4.
How to use the operator software
The OS5 software uses a clear structure of register cards and the contents automatically adapt
to the firmware of the controller.
4.1.
I/Os (Inputs and Outputs)
This register card shows the logical state of all digital inputs and outputs.
4.1.1.
Inputs
Inputs which are in use for the current application are marked with text, and unused inputs are
marked with “Command …” only.
Indicator boxes in the column marked “X6” shine blue, when the associated input signal on
screw terminal strip X6 is HIGH. LOW state is white.
Indicator boxes in the columns marked “RS” shine blue when the associated input signal has
been switched on via serial link. White box means “signal off”. You can switch on and off every
input from your PC by clicking to the corresponding indicator box in the “RS” column.
Indicator boxes in the column “BUS” shine blue, when the associated input signal has been
switched on via CANBUS. White box means again “signal off”. All input signals follow a logical
“OR” conjunction and the input is in “ON” state when one or several boxes shine blue.
