Motorola WT4090, Integrator Manual

Page: 84 / 206

5 - 18 WT4070/90 Wearable Terminal Integrator Guide
Figure 5-21
Passkey Dialog Box
1.
Enter the passkey in the
Passkey
text box.
2.
Press
TAB
twice to highlight the
Next
button.
3.
Press
ENTER
. The
IP Address Entry
dialog box displays.
IP Address Entry
Use the
IP Address Entry
dialog box to configure network address parameters: IP address, subnet, gateway, DNS,
and WINS.
Figure 5-22
IP Address Entry Dialog Box
1.
Use the navigation keys to select either
DHCP
or
Static
from the drop-down list.
2.
Press
TAB
twice to highlight the
Next
button.
3.
Press
ENTER
.
Selecting
Static IP
displays the
IP Address Entry
dialog box. Selecting
DHCP
displays the
Transmit Power
dialog
box.
Use the
IP Address Entry
dialog box to enter the IP address and subnet information.
Table 5-12
IP Address Entry
Encryption Description
DHCP Select Dynamic Host Configuration Protocol (
DHCP
) from the
IP Address Entry
drop-down
list to obtain a leased IP address and network configuration information from a remote
server. DHCP is the default setting for the wearable terminal profile. When DHCP is
selected, the IP address fields are read-only.
Static Select
Static
to manually assign the IP, subnet mask, default gateway, DNS, and WINS
addresses the wearable terminal profile uses.